Corvette Salad shooter 16 x 8,5 on E36

[Sam_bmw]

[Sam_bmw]

Do you want to reduce wheel gap with out going lower?

yes if it possible or at least put some 195/45/15 that would go height a bit and after lower it to make the wheels gap less ... cause i know i want to go lower but 16 on a e36 is hard to make the stance perfect and go lower at the same time ... and in Quebec the road is so crappy that there is a few that is really low!!

[Takahashi]

Looks nice but needs to be lower

[Kielan]

Do you want to reduce wheel gap with out going lower?

[Sam_bmw]

at least maybe you will all say to go much lower but still im rubbing all the time and with the bad road in Quebec city i can go more lower with 16 x 8.5

do you think with a 195/45/16 or 205/45/16 that will make the small wheels gap better ?

[Sam_bmw]

[Mateen9]

hey , i have been posted here for a while at least the vette wheels are on ! they are 16 x 8.5 with a final offset of 13 . i got 205/40/16 mounted on them ! it look goods

pics

[Sam_bmw]

hey , i have been posted here for a while at least the vette wheels are on ! they are 16 x 8.5 with a final offset of 13 . i got 205/40/16 mounted on them ! it look goods

[TheJakeR]

ive got 1.5 inch adapters for my 88 corvette ZR1's. Final et of 17 on my e36 saloon. Love it!

[ChrisVRsix]

my adapters are 25mm so et 7 is the result, doo ittt

[cambertoes]

Posted by bi4rachrth - corvette accessories

I believe this is an early to mid sixties, but not sure yet.

what about zo6's, tons of guys seem to have them?

[Montreal e36]

here you go

http://stanceworks.com/forums/showthread.php?t=9818

[Team_Gileto]

5x120.7

[dc5tunerx]

whats the bolt pattern of the salad shooters?

[Tuck&Poke]

thank you !! i was thinking i will have a offset of 56 but since the wheels size are 16 x 8.5 they come with a offset of 32 . i talk to the guy in the forum named ( BALLEUR ) and he said to me that i need to buy 20mm adapter with a tire size of 205/40/16 with rolled fender in the rear and that should be good ! Btw talk to your brother i want to know what he have done ! thx for the help

sounds right