If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
That's loads of room to go down actually. At that height, scraping shouldn't even be an issue, I should know, mine is sitting at around that height currently.
You can go at least one inch lower before scraping really becomes an issue...
Any lower than 2 inch clearance though, and you must be really hardcore, like Sean and the other guys. I know that for me, 2 inches is the lowest I would go on a car like this.
Apart from that, the car looks mighty fine, I really have a soft sport for white E36 sedans. One thing I'd def. do is black out the mouldings and bumpers and skirts, the grey they are currently just isn't enough contrast. Make them a proper black and that will look really good. Oh, and please don't mount the M-package.
Sean haz 2inches? from which point? bumper? sideskirt? frame?
OK, I promise to do it but when I get tires with less 'wall.
You are more than likely right about 2 inches being more than enough clearance, but honestly with tires this thick, I wouldn't be able to turn long before I got that low.
On a related note, we have a 3 inch curb at the end of the driveway, and the flaps on the bumper scrape it when parking.
I'd love to, but I'm afraid I have to actually drive places. I have about 3 inches from the frame to the ground.
That's loads of room to go down actually. At that height, scraping shouldn't even be an issue, I should know, mine is sitting at around that height currently.
You can go at least one inch lower before scraping really becomes an issue...
Any lower than 2 inch clearance though, and you must be really hardcore, like Sean and the other guys. I know that for me, 2 inches is the lowest I would go on a car like this.
Apart from that, the car looks mighty fine, I really have a soft sport for white E36 sedans. One thing I'd def. do is black out the mouldings and bumpers and skirts, the grey they are currently just isn't enough contrast. Make them a proper black and that will look really good. Oh, and please don't mount the M-package.
I'd love to, but I'm afraid I have to actually drive places. I have about 3 inches from the frame to the ground.
I have another inch I could go down in the front and about .75 in the back if I take the perches out, but I don't think I could turn; it already barely misses the arch.
I know, I know, it needs stretch and poke, but until I wear these tires down, there isn't even a chance it's gonna happen. Anyway, tell me what you think:
Leave a comment: