Really Low, Crazy Static Fitment Z32

[Tosh.Low]

Update time. My springs finally came in, 26k 6 inch springs in the front and 24k 7 inch springs in the back. Length difference is because of the rear suspension design, I'll be able to sit it on the ground completely if I want to. Here's a picture finally!

[Tosh.Low]

Please post extra detailed pics of fender rolling. I will definitely be doing the rears on my '91 NA but I'm a little confused about the fronts. Fender liner removed? Cutout just the edge?

What camber will you be running?

The fender rolling will be rather simple, remove the liner In the front and get the rear as flat as possible. The parts that rub usually are both bumper tabs, front and rear.

I'm aiming for 7 degrees of camber in the rear and 5 or so in the front.

[Creation]

This is going to be soooo good.

[AllGo'N'Show]

Sub'd for Z32 content! 26k damn, going to ride worse than my 1-ton :P

[danbarnett123]

Please post extra detailed pics of fender rolling. I will definitely be doing the rears on my '91 NA but I'm a little confused about the fronts. Fender liner removed? Cutout just the edge?

What camber will you be running?

[Tosh.Low]

Allright time for another update. I haven't had any pictures, yes I'm lame I know. But I do have some good news, the clutch and bad throw out bearing is getting replaced tomorrow, and my swift springs are finally off the container so I will be paying for those on Monday. Car should be on the ground as soon as the springs get to my house!

[Hellalime]

In for this, always loved Kranze Bazreia's, hopefully shes fixed soon enough so I can see this thing in some rolling shots :P

[Tosh.Low]

Update, and some bad news. Car is down and out at the moment, was driving on a bad throw out bearing while waiting for a new clutch. Parts finally arrived but the throw out bearing bit the dust. Should have it all replaced this weekend hopefully.

[Tosh.Low]

Those Bazerias look a lot nicer with tires. I've seen them for sale without and they didn't look that good. I like yours, but I hope that gap between the tire and wheel closes up.

I've always like them, not too sure how they will look but I have high hopes. As for the stretch, that won't be going anwhere. Need that much for how aggressive my fitment will be.

This is going to be interesting. Can't wait to see you put it all together!

Thanks! I'm looking forward to finishing it, been a long time Coming.

[PattyMills]

This is going to be interesting. Can't wait to see you put it all together!

[aerhead1]

Those Bazerias look a lot nicer with tires. I've seen them for sale without and they didn't look that good. I like yours, but I hope that gap between the tire and wheel closes up.

[244Brick]

Nice. Always ***** to love these. Amazing machines.. minus working on them!

[Tosh.Low]

Update! Picking up a 1990 Badge-less nose panel this weekend, as well as ordering my new front bumper! All the parts I need to put the wheels and coils on should be arriving very shortly!

[Tosh.Low]

my friend used to have one of these but his had too many problems and he got rid of it for a 240 lol so im looking forward to seeing what it could be with someone who wont just give up on it.

Appreciate it! I gave up on the Yellow one I had, determined to see this one through. I've Already Spent More Money On maintenance than I spent on my wheels, so hopefully once that stops I'll have it finished up pretty quickly.

[Ryan.]

my friend used to have one of these but his had too many problems and he got rid of it for a 240 lol so im looking forward to seeing what it could be with someone who wont just give up on it.