Might be the only bagged C43 AMG Benz ever ?

[SD202]

Welp, Bought a bender yesterday. and 6 more feet of copper tubing ( in stick form) Will be adding a couple more lines to the system as well as redoing the single hardline. I just am not satisfied no matter what i do to the trunk.

[SD202]

went a different direction with the setup for the time being. I already dislike how it turned out and want to redo the tank/ hardline setup and add a couple more lines to it. I didnt have a bender and decided to use the old plumbing trick of filling the tube with sand and hand bending it. It worked surprisingly well. However i could not get close 90* bends like I wanted to I will be re-doing the setup once I get a bender, some more fittings and airline.

[244Brick]

Zamn!

[SD202]

Great craftsmanship so far! Realy like what you did with the headliner and all!
I do not really get the choice for the ambers though. It somehow makes it look like a pre-mopf with some c43 bits attached. But hey, makes it a great sleeper right?

LOL thanks, Its a US thing? IDK? Haha No W202 was ever sold or offered with the "espirit package" here in the States. These ambers were on my 96' C280 and I fell in love with how they looked. I know every other country in the world the look is "cheap" or from the earlier models but I like the contrast it brings to the car and the fact that not very many people with 202s around here rock them, Everyone with a 202 has chrome grill and clear corners. haha Not to mention getting true amber Bosch corner lights here is rare, & cost quite a bit. I have the Factory lights for it as well so no worries if there is ever a next owner they will have the choice of both.
But if you want to talk about sleeper, Next on the list is to swap the old tired 4.2L M113 out for a N/A 5.4L m113, De-badge and call it done at that point :

Already changed it up a little in the trunk. I wasnt happy with the wood so I had to polish it and I repainted the tank from black to silver. And I guess I am going to try my hand at some hard lines. Still a work in progress. waiting on some bulk head compression fittings to arrive. I have been a bit more active with working on my car lately with summer fast approaching and Wuste Vegas is right around the corner also.

Used "Bona" polish on the laminate wood. Its made in Sweden. They invented laminate flooring, so I trusted this stuff.


I had read reviews about it needing to be reapplied every few months and it was not worth the money but at $17 I figured I would give it a try not to mention those are people using it on the floor that most likely sees daily use. The results are what I was after. And since my floor is in the trunk of my car and not....on the floor....There should be very minimal traffic over the polished area.



Works well IMHO





Will Update when the fittings arrive.

[loekaaz]

Great craftsmanship so far! Realy like what you did with the headliner and all!
I do not really get the choice for the ambers though. It somehow makes it look like a pre-mopf with some c43 bits attached. But hey, makes it a great sleeper right?

[perttusi]

I want ride in that lol.. holy shit it looks good.

[SD202]

Now i agree with that!!!!

These 215/35s just dont have enough grip IMO

Car is bad ass man keep it up
I had one for a short time the aftermarket support sucks but you have brought it a long way!

Yes this is true sadly a lot of stuff has to be custom made for any serious modifications, but isnt that the way it should be? lol

Update: So I went ahead and did a wood trunk floor, Used a walnut laminate, This was my first time working with wood and such. I think it turned out decent. I finished and instantly wanted to go back and redo it in something with a high gloss look to it. Also had some suede laying around from when I did the headliner so I decided to do the A pillars, Next will be the B and C but I now have to buy more fabric. sorry for the terrible iphone pics.

[Gurv ///M]

Car is bad ass man keep it up
I had one for a short time the aftermarket support sucks but you have brought it a long way!

[244Brick]

Now i agree with that!!!!

[SD202]

Personally i vote against the bolt on flares! I'd love to see it wider, but not that way

Yeah, I have decided against doing the fender flares. Honestly didnt work well with the over all look of the car. I do want to widen the rear slightly so I can put some wider tires back there but still be able to tuck/lay it out

[244Brick]

Personally i vote against the bolt on flares! I'd love to see it wider, but not that way

[TruTaing]

The 19s looked sooo big/out of place! Cutting fenders and adding flares??1?!?! Yea, I wanna see that!

[OsckR]

I didn't think you could one-up the lorinsers ..... but you DID .... TWICE

[VanDamage]

Saw those wheels and whatever white ones you were running on IG. Looks waaaay better than the 19's did

[SD202]

well, Changed the wheels again. 19s were just to big. most of you know this already. new wheels are VMR v705 powder coated silver. I want to change up the color on them but I dont know how long i will be keeping them for.






Also got my steering wheel back from craft customs with blue basting stitch to match the Blue/black two tone leather and blue stitching that the car has already.








I also relocated my air tank and hid the compressor and sub woofer underneath the trunk floor. will be adding hardwood and possibly repainting the tank before wuste. So pics of that will come shortly.