Just another E30 build.... (a.k.a. The Bronzit B*tch)

[meech]

looks great man

[K-Line]

Two things.

Helped Ian do the rear end AND ROLL HIS FENDERS this weekend, so he did a fat BARNOUT!

Ians Barnout from GREGKLINE on Vimeo.

And Aaron of FuocoNation took pictures of my automobile

[K-Line]

What up yo!

Exhaust parts came in during the week!

Vibrant streetpower muffler



Vibrant resonator



and a V band clamp to be fancy




Also got my Miller WAR chip installed, which was the easy part. Writing the tunes on it was literally hell...


The program for it uses ONLY windows XP which is a very outdated and no longer used OS, so I have to find a PC (who even uses one of those #mac) and them spend hours running a Virtual PC on it to used windows XP mode. It sucked, but its done.






Until next weekend....

[K-Line]

Forgot to post this, bought a pressure gauge to run in my trunk. I plan on doing something fancy in the future!

[K-Line]

Got some pics from home! The Bronzit Bitch is gonna be making a little more power this season thanks to a Miller W.A.R. chip!











Cant wait to get this thing in. Going to run a performance base tune to start off, but eventually tune it to my specific build, hoping to find some S50 cams over summer. Also going to run a 2 step rev limiter...

[K-Line]

Last real big load of parts ordered!

[K-Line]

Got my trunk setup done! Im really proud of this cause it came out so good! Took the original floor mat from the truck and traced it onto some light plywood and cut it out. The covered that with some of that carpet from lowes, its not perfect but the color is close enough.



Here it is in the car, you can see where the compressor and return lines come through in the center



in the car!







Things are going well, my winter to-do list is almost done. I have to build an exhaust and a few other small things and shes good to go!

[K-Line]

What's that by the bottom edge of your door?

Car is really coming together well=)

Yeahhhh a little bit of rust, ive fixed all the rust on unpainted surfaces, ill get the other stuff when i paint the car. and thank you!



Also just took her out for her first drive! Ran great and the air ride is AMAZING! still need to build an exhaust so it was a little loud

It was also the first pull over lol i had dealer plates on it from our friend and they where a little skeptical but all is well!

[Earl]

What's that by the bottom edge of your door?

Car is really coming together well=)

[K-Line]

Car looks absolutely awesome. Just wondering where you got the spacers. They look like the are hubcentric to both original hub and the wheel which is what i have been looking for.

42 Draft Designs, all are made to order and yes theyre hubcentric for the hub and wheel!

[jlaffo91]

Car looks absolutely awesome. Just wondering where you got the spacers. They look like the are hubcentric to both original hub and the wheel which is what i have been looking for.

[eethirty]

[K-Line]

So the brakes are done minus the parking brake, i love the look of all new everything!





Got the air lines permanently mounted in the wheel well and under the car



And fixed my evap tank in the rear wheel well



Probably going to take her for a drive today!

[K-Line]

*smile*
So good bud

On point man. Can't wait for more!

Thanks guys!

u would be nowhere without me

Your style wouldnt exist without me

[eethirty]

u would be nowhere without me