1993 240sx build

[Hellalime]

My jealousy right now is unreal, i **** you :p

[Chuckdee]

Still sub'd ! Keep up the good work!

[NordicMistBB6]

Car is id say 75% done, it isnt my main priority right now as my parents have moved down south and ive now got rent and other expenses, car will be done soon though, the last of my parts are here, engine has been in and out a few times recently to get the mounts perfect, painting the engine, and what not.

Wheels got to my house



Started taking them apart



My wheel rebuilding room in my house hahaha



New lips have been ordered alread (4"front and 5.5" rear) and the faces are being powdercoated jamaican teal. once the wheels are reassembled and my overs are fitted to the car and what not, ill get the car running and break it in, ill try to keep this updated as much as possible

ENJOY THE POTATO QUALITY PHOTOS

[NordicMistBB6]

nice to see an update, altough it's such a shame selling those cerberus. would look soo good imho.

excited to know the build is switching to a higer tempo with the car at your house. already now what color it's going to be?

there will be many more to come. everything is actually coming together now. had to wait a lot of time for swap mount parts and shit but its all here now. i would love to see cerberus's on my car, but unfortunately i done want to run a 17" wheel and i dont have enough money to fork over to have them stepped up to 18's, im sure the lxz's will look good also, especially with brand new lips and fresh powdercoat (gunmetal) on the faces. i went with Juniper Green, like my old 240sx was. i fell in love with that color, plus i want to keep something that will match the brown interior. but i feel excited to finally be able to work on my car whenever i want, i love where the car is stored, and they are all a bunch of cool guys, it just isnt cost effective driving 150 miles there and back for maybe 6 hours worth of work, i lose motivation. but not anymore.

[DutchieSaxo]

nice to see an update, altough it's such a shame selling those cerberus. would look soo good imho.

excited to know the build is switching to a higer tempo with the car at your house. already now what color it's going to be?

[NordicMistBB6]

Sorry for the lack of updates guys, the fact that my car is stored an hour and a half from my house makes it hard to work on a lot. BUT the car is being towed back to my house this weekend. Decided the car should get painted before the engine goes in so thats whats up next. Everything i need other than outer tie rods i already have at my house so waiting on parts isnt a problem anymore. Couple things have changed since last time. Im now running PBM flca's, tension rods, and modified knuckles. and i ended up selling off my cerberus I's and picked up another set of LXZ's. Currently they are 18x8 et36 and 18x9 et36 but will be relipped to 18x10/11 et11. once she's home ill start putting more photos up.

[NordicMistBB6]

updates on this?

Sorry man. Updates are coming shortly. Front tubs will get done next weekend and motor will go in the weekend after that. Got a new daily though! 2002 V6 tacoma 4wd. TRD supercharged >.>

Sent from my HTC One using Tapatalk

[DaguerrotypeI]

Damn son, at first I saw 240 and I thought, zilvia, then I saw all that you've done so far and was like damn! Keep up the dope work man

[scweet14]

updates on this?

[EasySpeed*Inc]

Your car and shop are full of awesomeness

[NordicMistBB6]

Got up to the car yesterday and made it my goal to put it back on the ground. so i moved over my coils, knuckles, flca's, and tension rods over just to get her off jack stands. since im waiting on a caliper hardware kit only one caliper is on the car (rear) just so i have an ebrake. Both fronts and rears need spacers. i havent even adjust the coils since i had my XT7's on the car.

PICTURE TIME









Engine reassembly starts today, so ill update this again once i finish that.

[NordicMistBB6]

Engine goes back together this weekend! Since my Cerberus I's arent leaving japan until february and id like to put my car back on the ground soon i picked up some wheels and tires for now



and them after i mounted and balanced them!



Saleen replica wheels 18x9 et24 on a 215/35/18 front and 18x10 et22 on a 225/35/18 rear! ill have a test fit picture this Saturday when i go up to my car.

[NordicMistBB6]

LXZ's were sold before my guy went to pick em up... so i picked up some VS'KF's instead and i was all like ---->

[NordicMistBB6]

The problem is, my car is too nice to cut up, so now I don't want to do anything to it. I need a car that's a little on the rough side to butcher.

That car just sounded and acted right. High-revving, gear-banging and no pussy-footing.

so what are you saying chris!! my car is beat up?!?! besides the mixmatched paint its actually pretty minty :P but i know what you mean. and i have replayed that video probably 20 times. it sounded amazing, and he knew how to drive it.

[MommysLittleMonster]

Haha!! i figured id find you replying to this Chris, its not like its anything new, since i update it on facebook before this anyways, but hey you've got the m3 that you can do things too, which im jealous of. i actually almost traded the prelude for an e36 m3, but i had sold it hours before i messaged him. either way it worked out in the best way it could. and you got it Chris! that mustang TOOOOOOK that Porsche hahaha :thumbup :pokerface

The problem is, my car is too nice to cut up, so now I don't want to do anything to it. I need a car that's a little on the rough side to butcher.

That car just sounded and acted right. High-revving, gear-banging and no pussy-footing.