W123 on BBS RF's

[TiTyman]

this is how it might fit if I'm forced to run adapters

[TiTyman]

Love thissss. I think it looks best with the first set of wheels you had on it though

oh just wait... 16s will be 100xs better and ill be ale to go lower

[shippedout]

Love thissss. I think it looks best with the first set of wheels you had on it though

[TiTyman]

haven't updated in a while but here is whats to come 16X9 16x11

[TiTyman]

I got them a while back from vr wheels

[Raarasutra]

every time I load this thread I fall in love with w123s all over again...

[P78]

this has to be one of my favourite 123's!!

[DYan]

Where did you order those 3,5" lips? They look perfect!

[Dr.AK]

so cool. RF's are for winners. we are winners.

RF highfive.

Also to the OP of this thread.

And to anyone else with RFs.

[PentaAMG]

Thanks alot guys the wheels were originally all 17x 8.5 et 13 and the fronts still are. The rears went from a 2 inch lip to 3.5 to make them 10s so i guess the rear offset is somthing like -6. for springs I'm running h&r springs and I ended up cutting a coil off the front. I took all nubs out. I might cut a bit more, but I LOVE the way it rides.

If the you changed the wheels from 17x8.5 et13 with a 2.0" lip, into a 17x10 with a 3.5" lip, you ended up to the following :

ET13 with 2.0" - with 3.5" lip, means you changed the offset of 1.5" more toward the outside. 1.0" is 25.4mm x 1.5" = 38.1mm

So your setup in total is : 17x8.5 et13 with 2.0" lip | 17x10 et -25

I never ever thought that would fit though, but I'm guessing you just rolled the fenders, correct ?

Amazing looking ride though & MY BIGGEST RESPECT !!!

[Thooooom]

so cool. RF's are for winners. we are winners.

[willshaffer]

I like it a lot, I just wish it were physically lower, like if the wheels were an inch smaller but it had the same fitment I'd love it.

hypebeast

[Anvarv]

Please forgot those smoked lights. Original will be better.
Just my opinion. Nice car.

[Laef]

Man, this thing makes me love the w123's ...!

Any news ?

[mike-81-240d]

well it came on the car and I was going to remove it originally but the ac can't fight the Florida heat. I decided not to. The ac blows cool on these cars not at all cold. Just the way they are. Thanks for the compliments



I realized how much I would regret it

Do you have R134A in there, or R12?

They blow ice cold with R12, the system is useless with 134a unless you do the sanden upgrade with the parallel floe condenser.