DaHawaii Silvia..

[richard420ehhh]

doing it big i like i like i like!!

[DaHawaiiKid]

im going to ask a friend where he got some 50-75mm flares for the rear and hopefully with that and stretch i should be able to zero the camber out in the rear the front i am going to camber out but not stupid crazy amount...

[andybob]

Probably not. The seating surfaces are different, but its not impossible. A lot of custom steel wheels come with two "inside" lips or the lips are reversed for some reason, and the tires go on the same. With that much stretch whoever puts them on will have to use a cheater bottle, so it really isn't going to matter. A little tire lube and a 100psi cheater blast will sort everything out real quick.

Yeah, but what about the drop center part so you can actually get the tires on? I've done a bunch of sets of tires, and I don't really see how this is going to work. I feel sorry for the tire guy. lol

Anyways, carry on. I'd like to see how this turns out.

[Stupid Kid]

there's only one thing left to do......... Demon Caber IT!

Seriously he's going to need some healthy oni camber to make this shit work.

[Rob&co]

there's only one thing left to do......... Demon Caber IT!

[ChuckNDicks]

He will have to reverse mount when the tires go on.

Probably not. The seating surfaces are different, but its not impossible. A lot of custom steel wheels come with two "inside" lips or the lips are reversed for some reason, and the tires go on the same. With that much stretch whoever puts them on will have to use a cheater bottle, so it really isn't going to matter. A little tire lube and a 100psi cheater blast will sort everything out real quick.

[AMGwheelwhore]

Cool idea but doesn't mean anything unless you actually do it bro. Get busy!

[RolledAndPulledG]

The only problem is your rears poke 44mm further than his. Throwing your fronts on the rear would be a bit more attainable.

[jrcanes55]

Good potential, but all I've seen so far is how wide your wheels are.

[DaHawaiiKid]

So yea man all i have to say if you dont know me personally dont talk shit... i didnt come to stance works to deal with ass holes other wise i would have gone to a different forum.

but any way the reason i may sell car is i am planning on moving to cali where i will purchase another 13 and continue there because these wheels are coming with me!

anyways got a awesome box in the mail from DNel928

Untitled by DaHawaiiKid513, on Flickr

Untitled by DaHawaiiKid513, on Flickr

and this happened these are the fronts

Untitled by DaHawaiiKid513, on Flickr

rears

Untitled by DaHawaiiKid513, on Flickr

sizing :3

Untitled by DaHawaiiKid513, on Flickr

sidebyside

Untitled by DaHawaiiKid513, on Flickr

then picked up some ebay flares from a friend....

Untitled by DaHawaiiKid513, on Flickr
not real carbon fiber lol

Untitled by DaHawaiiKid513, on Flickr

Untitled by DaHawaiiKid513, on Flickr

Untitled by DaHawaiiKid513, on Flickr

then this stupid shit happened....

Untitled by DaHawaiiKid513, on Flickr

and yes those are 100mm overs at this point....

well i was doing some research and found this! exact same wheel width and tire size i want


Ogawa sans S13 fronts are 15x10 rears are 16x13! with a 195 tire on front and 225 on the rear... 1 by DaHawaiiKid513, on Flickr

Ogawa sans S13 fronts are 15x10 rears are 16x13! with a 195 tire on front and 225 on the rear... 2 by DaHawaiiKid513, on Flickr

Ogawa sans S13 fronts are 15x10 rears are 16x13! with a 195 tire on front and 225 on the rear... 3 by DaHawaiiKid513, on Flickr

[aduchh]

More pics !

[Stupid Kid]

I had 99% doubt and 1% hope when I opened this thread.

Then I saw OP was a highschooler. That 1% didn't make it too far.

Pretty much sums it up.

[Miroteknik]

I had 99% doubt and 1% hope when I opened this thread.

Then I saw OP was a highschooler. That 1% didn't make it too far.

[125 Over]

I was wondering where I left that C note.

[willis]

EVERYONE ALWAYS DOES BARRELS AS LIPS BUT NO ONE ACTUALLY DOES IT