Too many projects, but mainly an e28

[Sharkbite]

love the e21.
scion is gay as hell

[xBDIRTY]

Thanks for the kind words everyone, I'm ready to drive it already! It should come together quick though.

[rsingh3g]

Beautiful xb, I might be picking one up soon. Can't wait to see the finished product of the e28

[jennifhanlon]

Also love the xb and e21, real nice job

[xseveredveganx]

You're my hero.

^^Truth.

[nik]

You're my hero.

[Dsfaxon]

Stoked to see this

[xBDIRTY]

Maybe someone that has rolled one of these can chime in. On the MK3 Golf I rolled, it had the same stuff. I tried to cut the stuff out with a sharp box cutter, but that proved to be a lot of work. I then proceded to use a burly drill with wire wheel attachment. If you can get all that gunk cleaned out well with the wire wheel and hit it with some POR15, you'll be golden and prevent rust.

Yeah I'm not sure what it is, but it's THICK. I tried getting under it with a flathead and it just flexed

Anyways... More updates today. Nothing too huge but sometimes the smaller stuff is fun to read about too Since I am currently in the middle of the task of cleaning up all the faded trim, mirrors, those rubber bumper cover things, etc. I had to make a trip to the local parts store to grab my third can of "bumper paint".....and what says "I care about my old car" like some black ice trees!? Second best air freshener next to jdm squash. But I have to order another air spencer first.


Then I stepped in from the garage and look what was waiting for me.... My pup Harley and some new BMW goodies!


Got my new Kidney grille in, roundels, intake hose, and those plastic screws that hold the grille on that were all dried out and broke. I still can't decide if I want to black the grille out or not yet.


The second bigger box ended up being two of my wheels. I really don't want to say what they are yet before I get them "finished" how I want. No they're nothing baller... but I love the look of them and they'll treat me good throughout the winter without having to worry a lot about them. So I have a question for those of you watching. I already have plans for the lips of the wheels.... but what color do you think the faces will look good in? I'm really just stuck on black or maybe an off-white. Any other suggestions are welcome as well.
Now onto the small progress I made today. I **** how early it gets dark now, I feel so limited on time after work

Out with the old, in with the new!




I ain't about that duct tape life. That hose had to go.


Before I could throw the new Kidneys on, I had to finish cleaning these up and spraying them. The screws to hold these on are at the most ridiculous angles! Once they are dry tomorrow the front end should look complete again


Then I finally got the rear covers pulled off so I can prep and spray them tomorrow. As well as drill this thing out and tuck it back where it belongs.Would've started tonight, but the fronts were occupying my spray bench.


Also had to grab a shot of my interior with the seats in for the helluvit


That's all for tonight. I should be seeing the rest of my wheels and a couple more things by the end of the week, so stay tuned! Also don't forget to give me your input on a wheel color that goes good against the bronzit.

[xseveredveganx]

Maybe someone that has rolled one of these can chime in. On the MK3 Golf I rolled, it had the same stuff. I tried to cut the stuff out with a sharp box cutter, but that proved to be a lot of work. I then proceded to use a burly drill with wire wheel attachment. If you can get all that gunk cleaned out well with the wire wheel and hit it with some POR15, you'll be golden and prevent rust.

[xBDIRTY]

I approve of this thread.

YES! So I was looking at the seam sealer on this thing... dafuq did they use? Seriously don't think it's coming off before I have you do the fender rolling. Not sure what to do there....

[xseveredveganx]

I approve of this thread.

[xBDIRTY]

Looking good bro! Swing by the shop one of these days so I can see it in the flesh!

Most definitely! Got the seats back in it last night, and supposedly my grille and roundels will be here today, as well as two of my wheels... (two had to come from a further warehouse.) Spacers should be here tomorrow too. And then I'll start on the idea I ran past you on the wheels this weekend. Hopefully it turns out well.... If anything it'll be original Still have to get the vin inspection done before I can register it. At least I have the title unlike the hell I had to go through on the e21!

[Eurotrashedlife]

Looking good bro! Swing by the shop one of these days so I can see it in the flesh!

[xBDIRTY]

hahaha

ABSOLUTELY love your E21!!!!! super jealous bro!!

Thank you! it may be sold this weekend, It'll be a sad day but I need to tell myself you can't keep em all, and I really don't want to add another car to my insurance.... and those new wheels will look so good on the xB when I get the money

So jealous of the llama interior. Also love the xb and e21, real nice job.

Thanks Alex, I love your e28. Before I got mine I was going through a ton of build threads still undecided whether to get it or not. And every time I looked at your build I wanted one even more hahaha. I just hope mine ends up having as much character as yours does.

[willis]

So jealous of the llama interior. Also love the xb and e21, real nice job.