
Announcement
Collapse
No announcement yet.
Civic EG rebuild - the beginning // Slammed
Collapse
X
-
@Dsfaxon :
Interesting. Which springs did you use ? The OEM springs didn't fit the rokkor struts.
Regards
Leave a comment:
-
I had the same problem with my springs. I also have rokkor coils.
To solve it i used ebay springs on the rokkor struts.
Leave a comment:
-
Sry for the dirt.
I need to get lower at the rear and get much camber
Leave a comment:
-
Yeah, I know Turbotoy Performance from the german maxrev forum.
But I am not planning now a turbo. First I need the engine to run.
Or save money and buy a B18C4. I don't know, what I should take.
A D16Z6 or a B18C4.
The D16Z6 is cheaper, and with a turbo you can get there over 350HP.
I actually wanted about 200-250HP.
Regards
EDIT: And tomorrow I drive to Poland, so there will not be any Update for
10 days. But then I'll begin with the interior. Everything will go outside
and will be cleaned. Maybe I buy in Poland the black interior for the civic
RegardsLast edited by DoubleU; 03-30-2012, 12:16 PM.
Leave a comment:
-
Problem solved :
The springs were wrong
But I'm not happy with the rearIt needs a little bit lower.
Regards
Leave a comment:
-
OkeyNice to know.
But I have problems now on the rear of the car.
It won't go down... even at the lowest position it's higher
than stock.
Tomorrow I have to look, what happened there.
Regards
Leave a comment:
Leave a comment: