aeion's Nissan Hardbody | Low and Silly

[aeion]

So here's a little update on what I've been up to. Hi guys!

First of all, I raised the front of the truck up a little bit while tossing the idea around of starting to auto-x/track the thing.



Next I became the full time photographer for a couple of dealerships in town which is basically my dream job. I get paid decent, I get to drive all sorts of crazy shit around, and I get to do what I love for a living.



Then I went all the way to Houston to attend WekfestTX and to see all of my friends down there once again. On the way down I volunteered to transport a body kit for one of my friends in Dallas and a door for one of my friends in Houston so I loaded up and headed down.

Removal of kit:


All loaded up lol:


And what I did when I got there:


And lastly a couple of random videos that I've taken over the past couple of weeks of the truck.

https://www.amazon.com/clouddrive/share/EcqjKd3VbTgYOCI2P9tOmH8P36y5gJJbr5dfyw1tg-M

https://www.amazon.com/clouddrive/share/8l1juDen3b3GzFBTqZi5uuLu4T7qM8uT5VPeBM-mK-M

That's not full throttle, btw haha.

[aeion]

you running spacers or anything?

Not anymore. I did 1/4" ones once and it stripped four studs on one wheel. Never again.

Its called a carrier bearing, silly!, im sure mine is gross also

I know. But it literally supports the driveshaft lol. I'm a realist.

[TheCrabMaster]

Its called a carrier bearing, silly!, im sure mine is gross also

[SouthsideSupply]

you running spacers or anything?

[aeion]

Ok so it's the stupidest update ever but once again, I'm back. I moved last week to OKLAHOMA. Wtf, right?

Anyways the truck is pretty much the same. On my move my driveshaft support decided to say its final FUCK YOU to me. Luckily I was able to still make the move without having to stop to fix it. My front brake lines also said fuck you by rubbing holes in themselves by rubbing on the road occasionally. That was fun. Here's some pictures. Hello again, friends.





And some more stickers made their way onto the turd.



Murica Murica that truck is for sale.

[aeion]

Hi guys.

[aeion]

It does haha. I like the new tires much more than the old ones.

[TrailerTrash]

looks aggressive just sittin there

[aeion]

Got dat new beef


Untitled by AC Media, on Flickr


Untitled by AC Media, on Flickr

[aeion]

Ordered new tires. Prepare for more meat.

[aeion]

Seen you driving in the dirty merce today when I was getting tires on my scion lol

Stop by work and say hi!

Sent from my GT-I9100 using Tapatalk 2

[aeion]

Is your toe off? I'm riding meaty spares right now until I get my front end sorted out. I'll take your old shocks hahaha.

Yup. My tie rods and ball joints are shot though. And the old shocks go back for my warranties lol. Working at a parts store has its advantages.

Sent from my GT-I9100 using Tapatalk 2

[Isuzupickup]

I changed my front shocks again today. Upgraded once more to KYB Gas A Just 4wd shocks. Not quite as short of compression but much MUCH stiffer and the ride is very good now.

But I have a dilema. My front tires are absolutely toast. Showing wire, sidewall about to separate from the tread, bad things. So I'm going to need tires before I will be able to get new wheels. Therefore, should I buy a couple of used ones for the time being and go ahead with the wheels, or buy new tires and do all of the other stuff that really needs to get done before putting new wheels on?

Halp.

Is your toe off? I'm riding meaty spares right now until I get my front end sorted out. I'll take your old shocks hahaha.

[Jani7Bray]

I know there are so much more dutch people on this site/forum..

[AlwaysStunting]

Seen you driving in the dirty merce today when I was getting tires on my scion lol