PDA

View Full Version : Tarmac wheels available for just about any fitment!



John@Fifteen52
12-20-2012, 10:50 AM
Hello Stanceworks members! Many of you already know about the fifteen52 Tarmac wheel and have seen it used on many VAG applications. The Tarmac is available in 17x8, 17x9, 18x8.5, and 18x9.5 sizes in various bolt patterns and offsets.



http://images-cdn.ecwid.com/images/185392/35713171.jpg

http://images-cdn.ecwid.com/images/185392/18021474.jpg

http://images-cdn.ecwid.com/images/185392/50335075.jpg

https://sphotos-a.xx.fbcdn.net/hphotos-ash4/323448_320268858072135_1463911515_o.jpg



Many don't know that we keep a good stock of non-VAG fitments, plus blank/raw castings for custom fitments and finishes. The castings can be machined to just about any 5-bolt PCD and offset between ET0 and ET50. We also offer customer powder coating and polishing of the Tarmac.

http://images-cdn.ecwid.com/images/185392/22409073.jpg

https://sphotos-b.xx.fbcdn.net/hphotos-ash4/309476_10150951308473440_1196628440_n.jpg

https://sphotos-a.xx.fbcdn.net/hphotos-prn1/615988_328308223934865_443809829_o.jpg

https://sphotos-a.xx.fbcdn.net/hphotos-snc6/219231_319702221462132_922859129_o.jpg

http://images-cdn.ecwid.com/images/185392/50335085.jpg



Contact us at sales@fifteen52.us with any questions regarding the Tarmac or any other fifteen52 product!

BigRuss
12-20-2012, 12:03 PM
what qbput the 4 lug guys

Free taco.... tomorrow

John@Fifteen52
12-20-2012, 12:12 PM
what qbput the 4 lug guys

Free taco.... tomorrow

17x8 4x100 is in stock! Unfortunately, we can't do custom 4-bolt fitments due to the pockets in the pad.

https://sphotos-a.xx.fbcdn.net/hphotos-snc6/177270_208946912553868_384481241_o.jpg

BigRuss
12-20-2012, 11:07 PM
i run the 4x100... never seen them on your site

Free taco.... tomorrow

John@Fifteen52
12-21-2012, 05:36 AM
Link to 17x8 Tarmac:

http://fifteen52.us/shop-2/#!/~/product/category=2510773&id=9633509

niquemarshall
01-24-2013, 09:56 PM
Thinking about a set for my Mini, hmm

John@Fifteen52
01-25-2013, 05:10 AM
http://images-cdn.ecwid.com/images/185392/60944906.jpg

http://images-cdn.ecwid.com/images/185392/64185164.jpg

More Images here (http://fifteen52.us/shop-2/#!/~/product/category=2510773&id=9633509)

Rally
01-26-2013, 02:34 PM
Thinking about a set for my Mini, hmm

I got the chance to test fit the 18s on my clubman, and I loved the look.

http://farm4.staticflickr.com/3401/5708956888_ffa2e21cf9_o.jpg

http://farm4.staticflickr.com/3028/5708957778_a08fc515b5_b.jpg

yoshioka90
01-26-2013, 03:26 PM
dang. that looks really good andrew!

Brian.
01-27-2013, 02:43 PM
17x8's What's the offset on these? If they're close to +20, I'd love a set in 5x120 An do you guys do military discount?

sequence
03-26-2013, 12:03 AM
forever depressed if you can't get these in 4x114.3 :'(

John@Fifteen52
04-18-2013, 02:54 PM
17x8's What's the offset on these? If they're close to +20, I'd love a set in 5x120 An do you guys do military discount?

The 17x8 5x120 are ET35 as standard fitment. We can build you a set in ET20, but there is an additional charge for this. Shoot me an email and I'll work you our some prices!

john@fifteen52.us

John@Fifteen52
04-18-2013, 02:55 PM
forever depressed if you can't get these in 4x114.3 :'(

Not right now, but hopefully in the next production batch we'll either have 4x114.3 or at least have blank castings pocketed for 4-lug.

SwedishSpitfire
12-13-2013, 10:41 PM
I'm looking for a set of 5x108 bolt patterns for my C30...Either 17 or 18's would work :)

Chris@fifteen52
12-15-2013, 05:06 PM
We have some blank 17x9s left that we can do in 5x108 and any offset and color, lmk.

Chris@fifteen52
01-04-2014, 08:52 AM
Some new wheels
http://distilleryimage11.s3.amazonaws.com/92295f7c73e211e3ad5e12b4d7054647_8.jpg
https://scontent-b-iad.xx.fbcdn.net/hphotos-prn2/q71/s720x720/1545813_10151937554898440_1174396481_n.jpg
http://distilleryimage5.ak.instagram.com/51dce1e0742911e39cc2125190cee429_8.jpg

High_5er
01-06-2014, 09:52 AM
do you guys still do the multipiece tarmac? PM me the starting rate please? looking for a set for my 5er


EDIT: Nvm, just got your PM

Chris@fifteen52
01-07-2014, 10:25 PM
http://distilleryimage2.s3.amazonaws.com/30a2ffd875a911e3a57512f3c952acee_8.jpg

Chris@fifteen52
01-09-2014, 10:08 PM
https://scontent-b-iad.xx.fbcdn.net/hphotos-ash4/t1/1513248_10151949546098440_461085158_n.jpg

kittenpuncher
01-15-2014, 11:03 AM
Hey Chris will these wheels be made available anytime soon for the 5x112 fit.

<iframe src="//instagram.com/p/hOnEmoMnZp/embed/" width="612" height="710" frameborder="0" scrolling="no"

Chris@fifteen52
01-15-2014, 11:08 AM
Those are the 348s and are all forged and fully custom so 5x112 is no problem. 18s are $1099.52 each but pm or email to see if I can do any better.

Chris@fifteen52
02-01-2014, 09:57 PM
https://scontent-b-iad.xx.fbcdn.net/hphotos-frc1/t1/1743682_10151985691973440_1128108808_n.jpg

Chris@fifteen52
02-05-2014, 10:18 PM
http://distilleryimage3.s3.amazonaws.com/b1cf10b68a9d11e3a4ee0e1d609f6897_6.jpg

Chris@fifteen52
02-20-2014, 08:30 PM
https://scontent-b-lga.xx.fbcdn.net/hphotos-frc1/t1/1797496_10152024650553440_2039307181_n.jpg

Chris@fifteen52
03-05-2014, 10:59 PM
Only 2 more sets of the forged TurboMacs in 18x9 at the special pricing of $899 each in any bolt pattern, offset and color.

https://scontent-a-lga.xx.fbcdn.net/hphotos-ash3/t1/1977258_10152056973168440_500222766_n.png

Chris@fifteen52
03-17-2014, 06:42 PM
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-frc3/t31/p720x720/1980401_10152071328493440_392765522_o.jpg

Reubencanyon
03-18-2014, 07:31 AM
I highly doubt they make and 6 lug tarmacs

Chris@fifteen52
03-18-2014, 07:55 AM
We can do 6 lug Tarmacs in forged and with the blank cast wheels as well when we get more in stock.

Reubencanyon
03-18-2014, 06:34 PM
cany u pm me the specs and pricing?

kittenpuncher
03-18-2014, 07:48 PM
when will 18" 5x112 tarmacs be back in stock

Chris@fifteen52
03-18-2014, 07:49 PM
Hopefully we will have the cast Tarmacs back in stock this summer.

Chris@fifteen52
03-22-2014, 04:03 PM
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/t1.0-9/1970465_10152084050518440_730931728_n.jpg

Chris@fifteen52
03-25-2014, 07:54 PM
3 piece SC TurboMacs
http://distilleryimage10.s3.amazonaws.com/066f7f40b44511e3966f0e49e555b936_8.jpg

Chris@fifteen52
03-31-2014, 10:27 PM
https://scontent-b-lga.xx.fbcdn.net/hphotos-ash3/t1.0-9/374549_10152108048793440_710918852_n.jpg

Chris@fifteen52
04-04-2014, 02:40 PM
Profile of 3 piece SC TurboMacs
https://scontent-a-lga.xx.fbcdn.net/hphotos-prn2/t1.0-9/10154008_10152111540203440_1903461824_n.png

Chris@fifteen52
04-07-2014, 09:49 PM
Forged Monoblock TurboMacs in brushed with tinted clear coat
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc1/t1.0-9/1959343_10152115124303440_1801987983_n.jpg

Chris@fifteen52
04-09-2014, 10:15 PM
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-frc3/t1.0-9/1743703_10152095750448440_1900991403_n.jpg

werewolf4805
04-14-2014, 06:51 PM
http://i19.photobucket.com/albums/b185/wolfracing88/IMG_4136_zps8f7a33b3.jpg

Lovin' my Tarmacs

Andrew541
04-22-2014, 04:05 AM
I need 4 17x9 5x100 ET30 how much ?

Chris@fifteen52
04-22-2014, 07:45 PM
Sorry we are sold out of 5x100 17x9s right now.

Chris@fifteen52
04-25-2014, 07:22 PM
Forged 2pc or Forged 3pc
http://origincache-ash.fbcdn.net/923955_485785184883469_1079283020_n.jpg
http://distilleryimage10.ak.instagram.com/9b92d4d6cb0c11e3ab860002c954a3d6_8.jpg

Chris@fifteen52
05-09-2014, 09:50 PM
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/t1.0-9/10246235_10152185636263440_4078572798759900924_n.p ng

milano_red
05-12-2014, 01:42 PM
When will 18x9.5 et +25 5x114 be back in stock?

Can you do any lower offset than that?

Chris@fifteen52
05-12-2014, 01:58 PM
We will have more this summer and we will also have some blank 18x9.5s that we can drill to 5x114.3 and any offset.

GTShunter
05-13-2014, 08:21 PM
Do you carry these in 5x112 in 16x8? It'll be for my W123.

http://i.imgur.com/wXERMhY.jpg

Chris@fifteen52
05-13-2014, 08:23 PM
Sure we can do them in 3pc 16x8 in any offset.

Manny's
05-14-2014, 12:35 AM
just wondering when would you guys have the RSL Tarmac back in stock in 5x100?


http://images-cdn.ecwid.com/images/185392/205922553.jpg

Chris@fifteen52
05-14-2014, 07:18 AM
Yes we will have more later this summer.

milano_red
05-16-2014, 12:40 AM
We will have more this summer and we will also have some blank 18x9.5s that we can drill to 5x114.3 and any offset.

Awesome! Thanks for the feedback. Will et 0 be possible with a cast blank?

Chris@fifteen52
05-16-2014, 07:21 AM
Yes we can do any where from et50 to et0

milano_red
05-16-2014, 08:13 AM
Yes we can do any where from et50 to et0

I guess I know what wheels I'm buying!!!

Chris@fifteen52
05-19-2014, 09:30 AM
Just some new stuff

https://scontent-a-lga.xx.fbcdn.net/hphotos-frc3/t1.0-9/10369740_10152199349718440_2555171383504856323_n.p ng
https://scontent-a-lga.xx.fbcdn.net/hphotos-prn2/t1.0-9/10336622_10152197448908440_4357494347234574268_n.j pg
https://scontent-a-lga.xx.fbcdn.net/hphotos-prn2/t1.0-9/p720x720/10268613_10152195370073440_6044957128089680994_n.j pg
https://scontent-b-lga.xx.fbcdn.net/hphotos-prn1/t1.0-9/p720x720/10257380_10152193772708440_4946844708802187254_n.j pg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn1/t1.0-9/10350545_10152193326478440_9003667393336773993_n.p ng
https://scontent-a-lga.xx.fbcdn.net/hphotos-prn2/t1.0-9/10376316_10152193026033440_2431863865441731082_n.j pg

Chris@fifteen52
06-16-2014, 08:39 PM
Some new wheels from us, the Magnum Walker Outlaw 001
http://scontent-a-iad.cdninstagram.com/hphotos-xpa1/t51.2885-15/929114_1483952038508512_995232771_n.jpg

And the video Outlaw Fever

http://www.youtube.com/watch?v=3VBBuD0z174

Chris@fifteen52
06-23-2014, 10:57 PM
Some Forged 3pc Formula TR's
http://scontent-a.cdninstagram.com/hphotos-xpa1/t51.2885-15/10268930_788744097805503_681557052_n.jpg

Chris@fifteen52
07-09-2014, 08:57 PM
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xpa1/t1.0-9/p526x296/10527285_10152308830188440_7357918272952959738_n.j pg

Chris@fifteen52
07-17-2014, 10:22 PM
Centers for some 19" Integrale SC's
https://scontent-b-iad.xx.fbcdn.net/hphotos-xpf1/t1.0-9/10420165_10152330357088440_6958003548296832941_n.p ng

Chris@fifteen52
08-05-2014, 09:35 PM
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10570473_10152369165343440_7708237701390114153_n.p ng?oh=ecf22a93b3b59ef17ba34d4f3cef0129&oe=544D6A03&__gda__=1414688892_d24e85a72a1bf3eb27de3ae56b401ce 7

lilcraigford
08-08-2014, 12:00 AM
Will you be offering a 4x100 16x7" or 16x8" Tarmac at any point?

Chris@fifteen52
08-12-2014, 09:37 PM
Probably but not for a while

Japanese Mullets
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/q85/p480x480/10599291_10152384923013440_807367255288627103_n.jp g?oh=ea12d8fb65dc2a2712a731d0e43de55a&oe=54704625&__gda__=1417405877_d84341b95915b656dad10ae6cdfaf80 1

Chris@fifteen52
09-03-2014, 12:01 PM
3pc Touren SC's on a new A3
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/p180x540/10629839_10152422929333440_6704977999245573228_n.j pg?oh=cb90c89a8cbb7f46541fa3d5fb284e98&oe=54748B0E&__gda__=1416728561_dc41e80f5b3d3f56b0c5c6fb34af317 a

Chris@fifteen52
09-15-2014, 12:48 PM
https://scontent-b-iad.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/p526x296/10612555_10152447056503440_9209608214105507607_n.p ng?oh=147bb3262c67e2bb0c15d46bc91a0aee&oe=54D0D961

Chris@fifteen52
10-02-2014, 12:02 PM
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xap1/v/t1.0-9/10659238_10152686462390568_3594476371065548654_n.j pg?oh=3da092c7ac2baf70ff46cbd2b8077035&oe=54B89A84&__gda__=1421870033_0f653a528ce001f200105a2471714b8 2

Chris@fifteen52
10-07-2014, 08:21 PM
https://farm8.staticflickr.com/7187/13679517594_71102e390f_k.jpg

Chris@fifteen52
10-25-2014, 11:26 AM
https://scontent-a-lga.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10514577_10152539632568440_2085232608885304188_n.p ng?oh=aececc275fcaab6acf37d6b2b20bce05&oe=54EEE565

Chris@fifteen52
11-05-2014, 09:53 AM
Ken Block's new Gymkhana 7 car, 845hp AWD Mustang with 3 piece Fifteen52 R40 wheels
http://www.hoonigan.com/media/hoonigan/cms/FordUnicorn_Profile_fnl_lay_rgb-s.jpg

Skraight.
11-15-2014, 12:22 PM
Any future plans to make the 348 in a cast version? Love those wheels but the forged price is a bit out of range for a while.

Chris@fifteen52
11-15-2014, 05:01 PM
Yes hopefully by this spring we will have some cast 348s, we also have the Forged 2pc 348s and we have new/used set of 1pc Monoblock 348s in 5x100 18x8.5.

saturnstance
11-17-2014, 09:16 AM
Do you still sell the cast snowflake design?

Chris@fifteen52
11-17-2014, 09:23 AM
Well we are sold out of those aND are remaking them with a new mold so hopefully this spring.

Chris@fifteen52
11-27-2014, 02:58 PM
PM or email for the best deal
chris@fifteen52.us


http://i157.photobucket.com/albums/t50/chrislane31/1552v2/blackfridayFORGEDWHEELS.jpg (http://s157.photobucket.com/user/chrislane31/media/1552v2/blackfridayFORGEDWHEELS.jpg.html)

Chris@fifteen52
12-11-2014, 08:56 AM
We have a set of slightly used fifteen52 2pc Circuits (17x8 ET30 4x100) available wrapped in 205/40-17 Toyo Proxes tires. The setup has less than 300 miles and used solely for the SEMA Show last month. $3,000 for this like new setup.

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xfa1/v/t1.0-9/1505079_10152632624313440_1108562233463977341_n.jp g?oh=11b02cff44d7180b3a10073e0b9b81a5&oe=55146EB2&__gda__=1427348793_fced8d32cbcbb5edd850c5a4337fca5 1
https://scontent-b-lga.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/10606009_10152632624293440_7458943929830317058_n.j pg?oh=2a3e9bf6031ad81455001e83b44f2186&oe=5509F43C

Chris@fifteen52
02-07-2015, 12:12 PM
This spring the 19" cast Tarmac R43 wheels are coming
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10363806_10152730538893440_8889609305651323469_n.p ng?oh=6b06fe3816e182020768153e90e2dc27&oe=554FB7D4&__gda__=1432745387_1fe058bc44e6d6a7bca499230a95448 1

Chris@fifteen52
02-09-2015, 10:26 PM
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10802031_10152757093278440_7895968186742234911_n.j pg?oh=eb71bc79dce20a17b1e7ec7e0ec4e8f6&oe=555CD030&__gda__=1435589414_175b415d3b15eb62924ba3f4907c3e9 b

Chris@fifteen52
02-26-2015, 07:23 PM
New 3 piece Forged Formula LTWs

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/s526x395/1907570_10152823603463440_9105453230645124389_n.pn g?oh=e9818078ea7ed8b0ccc47085f68c66d4&oe=558390F1&__gda__=1431064061_b41cf129c34adddf9736d0931694dfc b

Chris@fifteen52
03-18-2015, 05:31 PM
Cast Tarmacs and Cast TurboMacs will be in stock in April and now will be even lighter.
https://scontent-lga.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/1486709_10152784535068440_2006295491298904791_n.jp g?oh=5da6bc3fe9adb817de42f3505cc5e373&oe=55801435

Chris@fifteen52
05-20-2015, 02:51 PM
http://fifteen52.us/wp-content/uploads/2015/05/pre-order.jpg

Preorder starting this week for Tarmacs in 17x8, 17x9, 18x8.5 and 18x9.5 and TurboMacs in 17x8 and 18x9. With more sizes and designs to follow.

Chris@fifteen52
05-22-2015, 05:29 PM
We are now taking preorders, get those orders in before they sell out.