autopilot v2 with 2 compressors

[cbus mkv]

anyone running to compressors with v2 management?
i got 1 connected now and i have an extra compressor in my garage and wanna hook it up but im confused on how to do it and don't wanna mess it up

if this has been covered please show me where cause ive been searching this forum and google forever

[rgarjr]

http://bagriders.com/modlab/tech/wir..._dual-comp.pdf

[arcelio13]

From Viar website:

Q: Is there a way to increase the flow rate of my compressors, and improve performance as well?
A: When using an onboard air system with multiple compressors such as P/N 38002, always plumb each compressor’s leader hose to separate tank ports. Doing so will increase flow rate by up to 20%, which will also increase your system’s level of performance.

Run the compressor's individually to an open port on the tank for best performace.

[Alex@BagRiders]

You can either wire them up like they have it in the AutoPilot V2 installation manual or like this:

[Live Fast]

I'm running dual 450C Viar compressors with my V2, I wired them up similar to the diagram above.

[stbk]

ive done it like this. and for some reason its not working. i cant use the auto mode in V2. only manual controls. so im gonna go for the 80amp stinger version and see if that helps. im running on a mk4 jetta.

i really dont know why its not working for me..

[Alex@BagRiders]

ive done it like this. and for some reason its not working. i cant use the auto mode in V2. only manual controls. so im gonna go for the 80amp stinger version and see if that helps. im running on a mk4 jetta.

i really dont know why its not working for me..

What do you have your ignition source hooked up to?

Here is a revised wiring diagram using one of our 4 gauge power supplies:

[Ljunberg]

Hey thanks for those diagrams man really helped!

[Alex@BagRiders]

glad to hear it!

[serpentinebelt1978]

I could with some compression on my 240z too, do you think that could be made to work flawlessly.