Announcement

Collapse
No announcement yet.

Gotti 140-US 3 Piece 14x7 4x114.3 PNW

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gotti 140-US 3 Piece 14x7 4x114.3 PNW

    I have a set of Gotti 140-US for sale.
    14x7
    4x114.3

    The centers were blasted and are ready for powder or paint. The wheels are in pretty good shape. I took photos of the worst pitting on the faces and on the lips themselves. They are true wheels and have no signs of bends. I also still have the aluminum washers which were used on the back of the wheels. The original hardware was too rusty to keep, but they had button head cap screws originally. The wheels accept a normal 1/4-20 fastener so that makes the hardware selection pretty wide, cheap and easy to procure. The lips have a number "2" on them which is pictured below. I think this is the width of the lip, because they are indeed 2". I did not have these numbers intentionally polished out, but you can see they are fading. I have seen these wheels and they supposedly take Datsun centercaps from a 240Z or 510 of the era. I have not confirmed this yet.

    As is: No hardware other than the aluminum washers and the raw blasted centers -- $700

    Shipping at your expense if needed.























    Last edited by TheNeek; 06-11-2013, 03:33 PM.

    Mr. Belvedere

    I want to buy your single 4x100 Ronal Racing center

  • #2
    ttt

    Mr. Belvedere

    I want to buy your single 4x100 Ronal Racing center

    Comment


    • #3
      Any idea on what the offset and center bore is for these wheels?
      BB6 Prelude . . E36 ///M3 . . VA WRX Limited . . 1969 Nova
      Originally posted by Ollie
      We all love to turn heads. Sub-consciously we're all materialistic attention-craving dickheads.

      Comment


      • #4
        Originally posted by MommysLittleMonster View Post
        Any idea on what the offset and center bore is for these wheels?
        I'll check tonight

        Mr. Belvedere

        I want to buy your single 4x100 Ronal Racing center

        Comment


        • #5
          78mm CB (measured not stamped so it might be off a smidge)
          Et 6. (Same)
          Last edited by TheNeek; 09-26-2012, 10:32 PM.

          Mr. Belvedere

          I want to buy your single 4x100 Ronal Racing center

          Comment


          • #6
            Dammit. Too low of an offset for me I think. Thanks for checking!
            BB6 Prelude . . E36 ///M3 . . VA WRX Limited . . 1969 Nova
            Originally posted by Ollie
            We all love to turn heads. Sub-consciously we're all materialistic attention-craving dickheads.

            Comment


            • #7
              Wheels were blasted and lips were polished, but aren't prefect. Buy as is, or choose your own color. Eventually I'll close this thread and finish the assembly.

              Mr. Belvedere

              I want to buy your single 4x100 Ronal Racing center

              Comment


              • #8
                bump... new price $700 plus shipping

                Mr. Belvedere

                I want to buy your single 4x100 Ronal Racing center

                Comment


                • #9
                  pm'd
                  Volvo Build Thread
                  Bmw Build Thread
                  Toyota Build Thread
                  zanebonk instagram
                  Tumblrrrr

                  Comment


                  • #10
                    Originally posted by montgomery View Post
                    pm'd
                    replied

                    Wheels are getting German Wheel Silver tonight and assembled with Mil Spec hardware by the end of the week. Price will be adjusted accordingly.
                    Last edited by TheNeek; 06-18-2013, 05:19 PM.

                    Mr. Belvedere

                    I want to buy your single 4x100 Ronal Racing center

                    Comment


                    • #11
                      fawk I wish they were x100!
                      IG @RobthaBavarian




                      Comment


                      • #12
                        Originally posted by Rob&co View Post
                        fawk I wish they were x100!
                        true story.

                        dual drill your hubs, or run adapters.

                        Mr. Belvedere

                        I want to buy your single 4x100 Ronal Racing center

                        Comment


                        • #13
                          Originally posted by TheNeek View Post
                          true story.

                          dual drill your hubs, or run adapters.


                          ahhhh I was trying to stay away from adapters on this car... Sawblades killed it for me and adapters on the last bucket lol.... And if so I think I would run some 5x120 wheel's......






                          Great wheels tho NIK! BUMPS!
                          IG @RobthaBavarian




                          Comment


                          • #14
                            sale pending

                            Mr. Belvedere

                            I want to buy your single 4x100 Ronal Racing center

                            Comment


                            • #15
                              sold?

                              Comment

                              Working...
                              X