Up for grabs, are my lovely AC Schnitzer wheels made by OZ.
They were refinished by me a while ago, and i would say are in a 7.5~8's condition out of 10.
Specs are-
2x 17x8.5" et13 2.5inch lips with 195/40 pirelli pzero nero tires.
2x 17x10" et19 3inch lips with 215/40 sunny tires.
Both sets of tires need to be replaced soon.
the wheels were bought and split apart, faces got professional repainted, tho there are some flaws. the wheel bolts were unoriginal 6mm (big no no, since the holes are 7mm wide) one of the previous owners had cut all of the original 7mm 10point OZ bolts out with an angle grinder and left marks in back of faces ill post a picture of it. I replaced the bolts with 7mm 12point after market bolts, commonly used on BBS wheels such as RS. Re-polished the lips and got as many curb marks out as i could. then resealed them. I have a refinishing thread that i will link as well. The lips could use a quick re -polish by hand to make em shine as new again.
Refinishing thread. CLICK HERE
When i just had gotten the centers back. After lips were polished.
Marks of the angle grinder (back of the face / center)
Here they are on my E36 coupe. depending on camber and how low you are, you will need to roll your fenders to run these wheels on a "small-series" bmw.
Take note, that the wheels are dirty in these photos.
And another one for good measure.
I recommend anyone to look at the link that i posted. Shows what was done with the wheels while i had them.
price is 1000euros / 1350USD
Shipping is on buyers expense and willing to ship world wide. Would prefer to deal with it in Europe. Since the price is way lower to ship it to Scandinavia or England compared to California or Canada.
The wheels are located in Faroe Island / Scandinavia. Sorry if i missed something. But just ask if there is anything.
Would prefer paying would happen through a bank. But paypal could be arranged as well.
They were refinished by me a while ago, and i would say are in a 7.5~8's condition out of 10.
Specs are-
2x 17x8.5" et13 2.5inch lips with 195/40 pirelli pzero nero tires.
2x 17x10" et19 3inch lips with 215/40 sunny tires.
Both sets of tires need to be replaced soon.
the wheels were bought and split apart, faces got professional repainted, tho there are some flaws. the wheel bolts were unoriginal 6mm (big no no, since the holes are 7mm wide) one of the previous owners had cut all of the original 7mm 10point OZ bolts out with an angle grinder and left marks in back of faces ill post a picture of it. I replaced the bolts with 7mm 12point after market bolts, commonly used on BBS wheels such as RS. Re-polished the lips and got as many curb marks out as i could. then resealed them. I have a refinishing thread that i will link as well. The lips could use a quick re -polish by hand to make em shine as new again.
Refinishing thread. CLICK HERE
When i just had gotten the centers back. After lips were polished.
Marks of the angle grinder (back of the face / center)
Here they are on my E36 coupe. depending on camber and how low you are, you will need to roll your fenders to run these wheels on a "small-series" bmw.
Take note, that the wheels are dirty in these photos.
And another one for good measure.
I recommend anyone to look at the link that i posted. Shows what was done with the wheels while i had them.
price is 1000euros / 1350USD
Shipping is on buyers expense and willing to ship world wide. Would prefer to deal with it in Europe. Since the price is way lower to ship it to Scandinavia or England compared to California or Canada.
The wheels are located in Faroe Island / Scandinavia. Sorry if i missed something. But just ask if there is anything.
Would prefer paying would happen through a bank. But paypal could be arranged as well.
Comment